It’s actually a timing issue
Here’s the short answer to the question, “What happens after the sun sets?”: a time gap between production and consumption during which most industrialists lose money without even realizing it. Energy storage—specifically, battery energy storage systems (BESS)—exists precisely to bridge this gap. It’s really a matter of timing.
By its very nature, solar energy produces the highest output around noon, and this gradually decreases as the day progresses toward evening. However, consumption at many production facilities is spread out over the day and often continues into the evening and night shifts. This mismatch isn’t new, but the cost has increased with the transition to hourly net metering. Now, the excess energy you generate at noon no longer offsets your evening consumption; nor are you compensated for the excess electricity fed into the grid. We discussed this change in detail in our article *Hourly Net Metering in Turkey*. As a result, every excess kilowatt-hour generated during the day—unless it is stored—is either sold at a very low price or is completely lost.
What exactly does a battery do?
An energy storage system solves the problem with simple logic: it charges when energy is abundant and cheap, and delivers it to you when it’s scarce and expensive. It stores the excess energy generated by the sun during the day and releases it in the evening according to your consumption profile and the battery’s efficiency criteria.
But that’s not the battery’s only benefit. The same system kicks in during sudden spikes in consumption to reduce the peak power the facility draws from the grid; this mitigates power and demand penalties—something many industrial operators often overlook. It acts as a buffer for critical loads during grid outages. When configured on a sufficiently large scale, it provides flexibility, opening the door to generating revenue from grid services.
What are the benefits for industrial users?
The most tangible benefit is in self-consumption. By using the energy you generate yourself rather than selling it back to the grid at a low price, you not only lower your bill but also recoup your investment more quickly. Resilience against outages means production doesn’t stop; in an energy-intensive facility, the cost of even a one-hour shutdown is often many times greater than the electricity bill. The cost of the outage duration is equally important: the capacity and capabilities of your diesel generator, fuel costs, and the critical loads you’re forced to shut down all have economic consequences for you. Then there’s the carbon aspect: the more renewable energy you use, the less energy you draw from the grid—and consequently, the smaller your carbon footprint becomes.
So, does it make sense for every facility?
To be honest: no. Energy storage is a powerful tool when installed in the right place; when installed in the wrong place, it’s a wasted investment. In a facility where consumption is already concentrated during the day and production aligns with it from the start, the contribution of a battery may be limited. In a location where electricity is cheap and the grid is highly reliable, the payback period may be extended.
In contrast, at facilities that operate primarily in the evening and at night, pay high demand surcharges, are affected by outages, or have a large surplus of solar energy they cannot utilize, a battery quickly becomes a valuable asset. The deciding factor here is not the pressure to “follow the crowd,” but a decision based on your own load and generation profile.
The right size determines everything
A battery’s value is measured by how well its capacity and technology align with your facility. A system that’s too large is unused capital that takes too long to pay for itself; one that’s too small prevents you from realizing the savings you could achieve. The right size isn’t determined by guesswork, but by analyzing your facility’s historical consumption and production data hour by hour. How much extra do you produce at what times, how large is your evening deficit, and where do your demand charges come from—any step taken without clarifying these points is ultimately just a guess.
Not a device, but a system
It’s misleading to think of the battery as a standalone box. Its true value lies in the smart layer that manages it in conjunction with solar, wind, generators, and facility loads. That’s why storage must be addressed in conjunction with an energy management system (EMS); decisions on when to charge and discharge should be based on real-time prices, generation, and consumption. We explained how the EMS handles this in our article, *Optimizing Consumption and Production with Smart Energy Management Systems*.
Dexren’s Approach
Dexren takes a comprehensive approach to energy storage from start to finish. The process begins with feasibility studies and proper sizing; energy, efficiency, and revenue modeling are performed, grid compatibility is verified, and a techno-economic analysis clearly determines whether the investment truly makes sense. Once a decision is made, a turnkey installation process begins, covering design, equipment selection, integration, regulatory procedures, and commissioning. Once the system is operational, the process continues with long-term operation and maintenance. In this way, the battery becomes an asset that generates value throughout its lifespan, rather than a one-time purchase.
Final Thoughts
What happens after the sun goes down is now a matter of the facility’s own choice. It’s possible to carry that excess energy into the evening—or to let it go to waste. The most reliable way to determine which option applies to you is to examine the data on your load and production profiles.
To see with concrete numbers whether using energy storage technologies makes sense for your business—and if so, what scale to implement—you can contact Dexren Energy.